Zhengzhou Forever Superabrasives CO.,LTD
forever@forever-superabrasives.com
+86-371-63390507

Electroplated CBN plated grinding wheels for band saw blade sharpening


We can offer CBN sharpening wheel which will correspond to any band saw You are working with

  • Alias: band saw grinding wheel

  • Tyle: 4Y2

  • MOQ: 5pcs

  • E-mail: forever@forever-superabrasives.com

You may also like

We can offer CBN sharpening wheel which will correspond to any band saw You are working with. So it does not matter from which producer You buy Your band saws, we will supply the CBN grinding wheel which will perfectly fit the profile of Your saw.

Any tooth step can be supplied even if You sharpen not only narrow, but wide band saws as well or perform any other profile grinding.

Mostly used borazon (CBN) wheel profiles are for band saws of following producers:

Dakin-Flathers Ripper37 (22mm , 19mm), Dakin-Flathers Ripper37 7 degree, Dakin-Flathers Ripper37 deep 7, Timber Wolf, Wood-Mizer 7/32, Wood-Mizer 7/39.5, Wood-Mizer 7/34, Wood-Mizer 9/29, Wood-Mizer 10/30, Wood-Mizer 13/29, Wood-Mizer 10/30 (1 1/8“ – 28,6mm), Wood-Mizer Vortex, Lenox, Lenox Woodmaster C, Lenox Woodmaster (1“ – 25,4mm ), Munkfors, Munkfors 1 (1" - 25,4mm), Fenes, Armoth, Ro-Ma, Wintersteiger, MK Morse 1,14 TPI, MK Morse 1,3 TPI, MK Morse 1 TPI, MK Morse 2 TPIBacho, Simods, Forezienne, Bacho, Pilana and others...

WHEEL PARAMETERS

VERY LONG WORKING LIFE
PROVIDES EXCELLENT GRINDED TEETH SURFACE FINISH
ELIMINATES MICRO CRACKS IN THE BAND SAW
PRODUCED PERFECTLY TO MATCH YOUR BAND SAW TOOTH
DIFFERENT GRAIN ROUGHNESS CAN BE SUPPLIED
CAN BE PRODUCED ACCORDING TO YOUR BAND SAW PROFILE

Any electroplated CBN sharpening wheel for band saw grinding can be produced according to Your requirements.

Standard wheels parameters are:

Outside diameterBore diameter
127 mm / 5 inch12,7 mm/ 1/2 inch
150 mm / 6 inch20 mm / 25/32 inch
203 mm / 8 inch32 mm/ 1 1/4 inch or 25,4 mm/ 1 inch

Other outside or bore diameters are available upon request.

Different wheel profiles for all kind of wood and seasons are available:

Few mostly used tooth angles, other angles are available as well.

10/30 - universal grinding wheel profile, which is used mostly.

9/29 - for winter time cutting suitable profile. Sometimes used to cut harder wood as well.

13/29 - for soft wood cutting

4/32 - for cutting very hard wood or deeply frozen wood.

7 degree profiles - special angles for cutting hickory, white oak, ash, hard maple and other wood.