The following cost analysis takes account of labor cost, machine cost and grinding wheels cost. Workpiece quality and redress life are related through the number of parts ground before roughness or roundness tolerance is exceeded.
It was found that the diamond & CBN grinding wheel formulas in Japan, Germany, and the United States are generally very simple, and the types of raw material are only a few. For example, over 80% of Japan's resin bond diamond & CBN grinding wheels, there are no more than 5 types of raw material, while the majority of the solutions have only 4 types of raw materials.
With the progress and development of the times, people’s production and manufacturing levels have undergone earth-shaking changes. Sometimes the electroplated diamond and CBN tools can’t meet some requirement, i.e. cost control, production efficiency, etc. So more and more people dispute that what is the essential difference between vacuum brazed and electroplated diamond CBN tools.
With the progress and development of the times, people's production and manufacturing levels have undergone earth-shaking changes. While people are improving their production levels, their requirements for tools are also getting higher and higher. They require higher and higher quality levels of tools, and at the same time the price of tools is also required to be lower and lower. This requires that the production of tools must improve production efficiency to the greatest extent.
With the development of knife sharpening industry, more and more people want to get new technology grinding wheels, then the diamond & CBN grinding wheels are introduced to knife sharpening industry, but new questions come up: which one is more suitable, diamond wheels or CBN wheels？Different people have different understanding, different companies also have different understanding. What I suggest is CBN wheel.
Carbide HVOF is a thermal spray coating process with carbide powder, which is used to improve a component's surface hardness and wear resistance. After the carbide HVOF, the workpiece surface is almost the same as carbide,but the grinding wheel for the carbide HVOF is different from that of the carbide, do you know why?